DOP ASA

$15

Allow 2 - 3 weeks.

DOP Double Trigger

Shoot faster with two fingers. This kit pops right into the Custom 98 only.

Not suitable for older Model 98.

No cutting required.

 

$55

Allow 2 - 3 weeks

These gas thru grips can later be converted to an x-core by purchasing an insert and snap ring.

Available in Black, Red, Blue, Green and Purple, and Polished Silver(add $10)

 

$25

Allow 2 - 3 weeks

X-Core Upgrade Kit

This kit will upgrade your existing DOP Gas Thru grip to an X-Core.

$25

Allow 2 - 3 weeks

This aluminum front grip replaces the plastic stock grip on the Model 98 & Custom 98 with a longer, more comfortable and very durable option.

Available in Black only.

$40

Allow 2 - 3 weeks

This expansion chamber has a large liquid cell at the bottom and then 8 micro cells on the top. The X-Core will give more than enough expansion cell area to break up liquid CO2 while still keeping a straight through, low resistance air flow for Nitrogen.

The input port hole is in the bottom, thereby removing the need to get the hole lined up. With the hole in the bottom, you just get a 90 degree connect elbow (same as with a gas-thru foregrip).

Available in Black, Red, Blue, Green and Purple, and Polished Silver (add $10).

$50

Allow 2 - 3 weeks

DOP 98 Custom Pro Seal

Front Bolt & Power Tube

Dead On Paintball has improved on the stock Tippmann power tube and front bolt. It's very smooth because of a precision Teflon insert running on a precision CNC machined billet power tube. This upgrade will improve air efficiency and should increase cycle rate.

This is Response Trigger ready.

$70

Allow 2 - 3 weeks

Dead On Paintball has improved on the stock Tippmann power tube and front bolt. It's very smooth because of a precision Teflon insert running on a precision CNC machined billet power tube. This upgrade will improve air efficiency and should increase cycle rate.

Also fits the 98 Custom.

$65

Allow 2 - 3 weeks

Replacement aluminum front bolt with Teflon insert for DOP Pro Seal.

$33

Allow 2 - 3 weeks

The Rocket Cock mounts over the cocking slot, keeping out all the dirt and paint, which will result in less cleaning and, some say, a quieter gun. Plus you get a cool rear cocking device, no more external moving parts to hit. This design has reinforced mounting holes to eliminate breakage, an anti-movement securing latch to eliminate unnecessary travel, and is made out of a much stronger and durable glass-fiber filled composite material to make this an almost indestructible item.

$35

Allow 2 - 3 weeks

This RVA drops in place of your rear end cap and allows you to adjust your velocity with a simple twist. It has a locking screw that makes it tourney legal.

Our rear velocity adjuster will allow you to achieve a safe velocity without cutting your drive spring. Adjusting your velocity by the hammer spring tension will increase your air efficiency and lower your recoil resulting in more shots per tank. Adjustable from 180 - 340+ fps.

Suitable for use on Model 98 and Custom 98

$35

Allow 2 - 3 weeks

This allows your Tippmann Model 98 or Model 98 Custom to accept the DOP X-Core expansion chamber.

$45

Allow 2 - 3 weeks

 

 

 

 

 

Enhance your Tippmann A5 with this high performance DOP X-kit. All these high performance upgrades are installed with some working on the internal of your marker. Assembly instructions come with each component.

Components of kit

A-5 Grip adapter block by DOP

Bullet Drop Forward 5525 Series

Dead On A5 Pro-Seal

Dead On A5 Vertical Adapter

Dead On A5 Double Trigger

Dead On X - Core 8 Stage

Dead On A-5 Rear Velocity Adjuster

4 Inch Hose Assembly

45 Degreee Fitting

$260

Allow 2 - 3 weeks

Enhance your Tippmann A5 with this high performance DOP X-kit. All these high performance upgrades are installed without working on the internals of your marker. Assembly instructions come with each component.

Components of kit

Dead On X - Core 8 Stage (Black), 4" Hose, 45 Degree Fitting, Bullet Drop Forward (Black), Dead On A5 Grip Adapter Block, Dead On A5 Vertical Adapter

$180

Allow 2 - 3 weeks

The Dead On A5 Pro-Seal is a power tube and front bolt replacements for the stock plastic powertube and front bolt.

The Dead On powertube is CNC machined from 6061-T6 aluminum barstock to Tippmann specs.

Performance Enhancements: Reliable power tube that will resist cracking like the stock version. The A5 will be a little more efficient because of the bushing length, less blowby.

$60

Allow 2 - 3 weeks

The A5 vertical adapter lets you mount an expansion adapter, reg, or CO2 tank at the stock front grip location. The A5VA still allows for the no tool field strip feature. Made from 6061-T6 aluminum, 303 stainless steel.

Performance Enhancements: Ability to mount a reg, expansion chamber at the stock front grip location.

$75

In Stock now

Vertical Adapter with an accumulator tank that won't let liquid co2 into the markers valve.

Performance Enhancements: More consistant shoots. More efficiency.

$110

Allow 2 - 3 weeks