Drop Forwards

Mini Drop Forward
The Mini Drop forward moves your tank up about 1.5" and will accept a standard bottom line or dovetail mount. The Mini also puts a small angle on the tank mount to put it at the perfect position for using a smaller tank.

Annodised $50.00

Chromed $60.00

Black in stock.

Allow 2 - 3 weeks.
Medium Drop Forward
This Drop Forward moves the bottle about 3 1/4" forward. Works perfectly if a longer Drop Forward gets in the way of your Regulator or moves a smaller tank too far forward.

Annodised $60.00

Chromed $70.00
Allow 2 - 3 weeks.
Long Drop Forward
The Original Shocktech Drop Forward pulls your tank forward an extra 4" to let you play tighter with a bigger tank. Our Drop Forward accepts both standard two hole bottom line mounts and also dovetail system mounts. A set screw helps keep the botom line in place.

Annodised $60.00

Chromed $70.00
Allow 2 - 3 weeks.
Spyder Adapter Block
The Spyder Adapter Block allows you to use a normal bottomline on your Spyder.
$20.00
Allow 2 - 3 weeks.

 

Note: The above Drop Forwards and Adapter Block are all available in Black, Red, Blue, Green or Chrome, see the Bottom Lines for examples of the other colors not shown here.

 

Kapp Angeld Angel Air Drop Forward

Unique angled drop forward, designed by KAPP for use with the Angel Air.

Available in Chrome, Black, Blue & Platinum.

Annodised $60

Chromed $75
Allow 2 - 3 weeks.
Lightning Drop Forward
Available in Nickel, Blue, Black & Red.
$50

Nickel in stock.

Allow 2 - 3 weeks.
Flame Drop Forward
Available in Nickel, Blue, Green, Black & Red.
$50

Blue in Stock

Allow 2 - 3 weeks.
RazorDrop Forward
Available in Nickel, Blue, Green, Black & Red.
$50
Allow 2 - 3 weeks.

 

DOP Bullet Universal Drop Forward Long

It moves your tank 5 1/2 inches forward and 2.5 inches down. It also includes an ASA with a hole for a gauge if you need it. (The hole is plugged when you get it. You can either leave the plug in, or remove the plug to install a gauge.) It has holes drilled to mount on standard OR Spyder bottomlines. Will work with all CO2 tanks and screw-in nitrogen tanks. This design also features On/Off capabilities.

Colors Available: Black, Blue, Red, Purple, Green, and polished silver.

Anodised $70

Polished Silver $85

Allow 2 - 3 weeks.
         

DOP Bullet Universal Drop Forward Short

It moves your tank 2 1/2 inches forward and 1 1/2 inches down at a 5° angle. It also includes an ASA with a hole for a gauge if you need it. (The hole is plugged when you get it. You can either leave the plug in, or remove the plug to install a gauge.) It has holes drilled to mount on standard OR Spyder bottomlines. Will work with all CO2 tanks and screw-in nitrogen tanks. This design also features On/Off capabilities.

Colors Available: Black and Satin Silver.

Anodised $65
Allow 2 - 3 weeks.
         

DOP Bullet Universal Drop None

Designed for the CO2 player. It moves your tank 1.3 inches down either flat or at a 7 degree angle. Will work with all CO2 tanks. Includes an extra 1/8 NPT hole for a gauge if you need it. You can either leave the plug in, or remove the plug to install a gauge. (The hole is plugged when you get it but not sealed. If you wish to keep the plug in, you will need to apply thread sealer to the plug.) It has holes drilled to mount either standard or Spyder grip frames. .

Colors Available: Black & Satin Silver

Anodised $60

Black in stock.

Allow 2 - 3 weeks.
         
DOP Pro Style Universal Drop Forward

It moves your tank 5 1/2 inches forward and 2.5 inches down. It also includes an ASA with a hole for a gauge if you need it. (The hole is plugged when you get it. You can either leave the plug in, or remove the plug to install a gauge.) It has holes drilled to mount on standard OR Spyder bottomlines. Will work with all CO2 tanks and screw-in nitrogen tanks.

Colors Available: Black, Blue, Red, Purple, Green, and polished silver.

Anodised $60

Polished Silver $75

Red in Stock

Allow 2 - 3 weeks.
         
DOP Pro Style Universal Drop Forwards Series II

It moves your tank 5 1/2 inches forward and 2.5 inches down. It also includes an ASA with a hole for a gauge if you need it. (The hole is plugged when you get it. You can either leave the plug in, or remove the plug to install a gauge.) It has holes drilled to mount on standard OR Spyder bottomlines. Will work with all CO2 tanks and screw-in nitrogen tanks.

Colors Available: Black and polished silver.

Black $70

Polished Silver $85
Allow 2 - 3 weeks.